 |
|
|
FM-200 flow sensor
|
|
Panasonic has developed a new digital flow sensor with integrated display for a wide range of applications. The FM-200 series can control and effectively manage flows using a variety of output modes. The setting conditions appear on the sub display, making it much easier to keep track of operations. In addition, the 2-color digital display lets you check the sensor's operation status at a glance. A new rectification mechanism and Micro Electro Mechanical System (MEMS) technology allow the sensor to be mounted on a silicon sensor chip and result in an extremely small heat capacity, high precision of #3% F.S. and high-speed response. Two temperature sensors, one on either side of the heater, detect heat distribution and make bidirectional detection possible. Characteristics: - Easy-to-read 2-color display with sub display
- High precision of #3 % F.S.
- One sensor for both intake and exhaust
- High flow-rate type for up to 1000 l/min
- Integrated value reset function
- Analog voltage and digital outputs
- Key lock function
- Rattle prevention function (response time setting)
- Display rate setting
- ECO mode
Options: - Sensor mounting brackets
- Panel mounting brackets
|
|
|
| PNP |
FM-252-4-P |
FM-213-4-P |
FM-253-4-P |
FM-214-4-P |
FM-254-8-P |
FM-215-8-P |
| NPN
| FM-252-4 |
FM-213-4 |
FM-253-4 |
FM-214-4 |
FM-254-8 |
FM-215-8 |
| Sensor type |
Digital flow sensor |
| Full scale flow rate |
500 ml/min |
1 l/min |
5 l/min |
10 l/min |
50 l/min |
100 l/min |
| Display range (bar) |
#9999999 ml |
#99999.99 l |
#999999.9 l |
| Setting and display resolution |
1 m#/min |
0.01l/min |
0.1l/min |
| Rated pressure range |
-0.09 to +0.7 MPa |
| Pressure resistance (bar) |
1 Mpa |
| Applicable fluid |
Clean air, compressed air, nitrogen gas |
| Linearity |
3% F.S. |
| Response time |
50ms to 1.5s selectable |
| Transistor output |
Max. 50mA |
| Output modes |
Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| Analog voltage output |
1.0 to 5.0V |
| Rated current consumption |
Normal mode: 60mA or less, ECO mode: 40mA or less |
| Housing material |
Resin body type |
| Protection |
IP40 |
| Physical size (HxWxL) |
37x55x17mm |
43x55x17mm |
| Connection method |
Connector |
| Operating voltage |
12 to 24V DC # 10 % |
| Ambient temperature |
0 to + 50°C |
| Temperature characteristics |
Within #0.2 % F.S./°C (+15°C to +35°C) |
| Weight |
Net weight: 50g approx. |
Net weight: 70g approx. |
| Port size |
o4 push-in |
o8 push-in |
| PNP |
FM-255-AR2-P |
FM-255-AG2-P |
FM-216-AR2-P |
FM-216-AG2-P |
| NPN |
FM-255-AR2 |
- |
FM-216-AR2 |
- |
| Sensor type |
Digital flow sensor |
| Full scale flow rate |
500 l/min |
1.000 l/min |
| Display range (bar) |
#9999999 l |
| Setting and display resolution |
1l/min |
| Rated pressure range |
-0.09 to +0.7 MPa |
| Pressure resistance (bar) |
1 Mpa |
| Applicable fluid |
Clean air, compressed air, nitrogen gas |
| Linearity |
3% F.S. |
| Response time |
50ms to 1.5s selectable |
| Transistor output |
Max. 50mA |
| Output modes |
Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| Analog voltage output |
1.0 to 5.0V |
| Rated current consumption |
Normal mode: 60mA or less, ECO mode: 40mA or less |
| Housing material |
Resin/Aluminum body type |
| Protection |
IP40 |
| Physical size (HxWxL) |
50x80x30mm |
| Connection method |
Connector |
| Operating voltage |
12 to 24V DC # 10 % |
| Ambient temperature |
0 to + 50°C |
| Temperature characteristics |
Within #0.2 % F.S./°C (+15°C to +35°C) |
| Weight |
Net weight: 155g approx. |
| Port size |
Rc1/2 female thread |
G1/2 female thread |
Rc1/2 female thread |
G1/2 female thread |
|
|
|
|
|
FM-200 typical application
|
Controlling purge gas and air blowing
|
Checking seating
|
Checking suction
|
|
|
Firma
Jonizatory
