 |
|
|
The industry's leading fiber amplifier in sensing performance
|
|
Thanks to its new "application-specific integrated circuit" (ASIC), Panasonic can solve applications with fiber optic sensors that were previously impossible. Not only can the FX-500 reach a response time of 25#s while providing extremely accurate detection, integrated logic functions save you money because external controllers are no longer needed for normal applications and threshold tracking and self-diagnostic functions save time for maintenance. Moreover, the reliability of the detection has increased by 75% compared to that of previous models. The customer can choose between digital output types with one or two outputs, or an analog output type. Characteristics: - One 4-digit green, one 4-digit red LCD display
- Copy settings via optical interface
- Decreased variations among amplifiers
- Input for external settings, i.e. threshold value (not available for FX-501)
- Up to 8 settings can be saved and loaded (data bank)
- Logical calculation functions
- Light intensity and gain setting for transparent object detection
- Threshold tracking
- Self-diagnosis output
- Display easy readable at angles of up to 60°
- Superior quality fibers (listed in the FX-500 brochure)
Accessories: - Quick connection cables in lengths of 1, 2 or 5m
- End plates
- Protection cover
|
|
|
| |
Standard type with 1 digital output |
Type with
2 digital outputs |
Type with
analog output |
| NPN output |
FX-501 |
FX-502 |
FX-505-C2 |
| PNP output |
FX-501P |
FX-502P |
FX-505P-C2 |
| Type of amplifier |
Digital |
| Timer |
Timer period: 0.1ms to 999.9ms |
| Interference prevention |
Incorporated |
| Sensing range |
Depends on fiber type used |
| Response time |
25#s, 60#s, 250#s, 2ms, 4ms, 24ms |
2ms |
| Output transistor |
Max. 100mA |
Max. 50mA |
Max. 50mA |
| Analog output |
|
4 to 20mA |
| Emitting diode |
Red LED (Peak emission wavelength : 650nm) |
| Housing material |
Plastic |
| Rated current consumption |
Normal operation: 40mA or less at 24V supply voltage |
| ECO mode: 28mA or less at 24V supply voltage |
| Protection |
IP40 |
| Physical size (HxWxL) |
32 x 10 x 75mm |
| Connection method |
Connector |
Cable 2m |
| Operating voltage |
12 - 24V DC (#10%) |
| Usable ambient temp |
-10°C to +55°C |
| Weight (approx.) |
Net weight: 15g |
Net weight: 60g |
| Gross weight: 70g |
Gross weight: 100g |
|
|
|
|
|
Typical applications
|
Edge tracking of film or sheets
Sensor: FT-WA30 + FX-505(P)
|
Detection of transparent labels on transparent sheets
Sensor: FT-W4 + FX-501(P)
|
Logic functions for synchronisation and detetection
Sensor: 2xFD-P2 + 2xFX-502(P)
|
|
|
Jonizatory
Produkty
