 |
|
|
LASER CLASS 1, VISIBLE RED LIGHT VERSION
|
|
The LM-10 series is the newest generation of laser sensors and offers excellent performance. The new single channel technology and the automatic gain adjustment allow high resolution measurements at a wide dynamic range. The LM-10 series is especially suitable for accurate thickness, displacement and position measurements. Characteristics: - Conforms to IEC class 1
- Resolution up to 5#m
- Smallest spot < 90#m
- Cross talk prevention function
|
|
|
| |
ANR1150 |
ANR1151 |
ANR1182 |
ANR1115 |
| Laser class |
1 |
| Measurement range (mm) |
50 # 10 |
50 # 10 |
80 # 20 |
130 # 50 |
| Beam dimensions (mm) |
0.6 x 1.1 |
0.09 x 0.05 |
0.7 x 1.2 |
0.7 x 1.4 |
| Repense frequency |
10/100/1000Hz |
| Resolution (#m) |
5/16/50 |
5/16/50 |
20/65/200 |
100/330/1000 |
| Laser wavelength |
685nm |
| Pulse duration |
15#s |
| Pulse pause |
15#s |
Max. output
of laser diode |
0.4mW |
| Housing material |
Zinc die cast |
| Degree of protection |
IP67 |
| Size |
60 x 60 x 20mm |
| Connection method |
Connector |
| Usable ambient temp. |
0°C to +50°C |
| Weight (approx.) |
300g |
|
|
|
|
LASER CLASS 2, VISIBLE RED LIGHT VERSION
|
|
The LM-10 series also includes a wide range of class 2 laser sensor heads which offer an even smaller resolution. Also a long distance type with a measuring range from 100mm to 400mm is available. The cable length of all class 2 types is expandable to up to 30m. Characteristics: - Long distance type: 250 # 150mm
- Resolution up to 1#m
- Smallest spot < 90#m
- Cross talk prevention function
- Connection with single- or double-channel comparator
Accessories: - Expansion cables up to 30m
|
|
|
| |
ANR1250 |
ANR1251 |
ANR1282 |
ANR1215 |
ANR1226 |
| Laser class |
2 |
| Measurement range (mm) |
50 # 10 |
50 # 10 |
80 # 20 |
130 # 50 |
250 # 150 |
| Beam dimensions (mm) |
0.6 x 1.1 |
0.09 x 0.05 |
0.7 x 1.2 |
0.7 x 1.4 |
0.8 x 1.5 |
| Response frequency |
10/100/1000Hz |
| Resolution (#m) |
1/3,5/10 |
1/3,5/10 |
4/13/40 |
20/65/200 |
150/500/1500 |
| Laser wavelength |
685nm |
| Pulse duration |
15#s |
| Pulse pause |
15#s |
| Max. output of laser diode |
1.6mW |
| Housing material |
Zinc die cast |
| Degree of protection |
IP67 |
| Size |
60 x 60 x 20mm |
| Connection method |
Connector |
| Usable ambient temp. |
0°C to +50°C |
| Weight (approx.) |
300g |
|
|
|
|
LM-10 CONTROLLER
|
|
Since the LM-10 Sensor heads and the LM10 Controllers can be connected and changed freely, you can easily find the ideal combination for your application. In addition to the analogue output, the LM-10 controllers have one (single comparator type) or two (double comparator type) set-point judgement outputs. The double comparator type shows the analogue values on an LCD. Characteristics: - Zero point adjustment
- Sensitivity selection
- VGA (Variable Gain Amplifier)
- Adjustment of frequency and set points
- Range LED
- LCD for analogue values and set points (double comparator type)
- Alarm output
- Intensity output
- Analogue output either current loop or voltage
- Transistor output either PNP or NPN
|
|
|
| NPN output | ANR5131 | ANR5141 | ANR5231 | ANR5241 | | PNP output | ANR5132 | ANR5142 | ANR5232 | ANR5242 | | Type | Single comparator | Double comparator | | Indication | LED | LCD display | | Analogue output | #5V, max.100mA | 4 - 20mA | #5V,
max.100mA | 4 - 20mA | | Evaluation output | Transistor, max. 100mA, 30V DC | | Intensity output | #5V | | Alarm output | Transistor, max. 100mA, 30V DC | | Housing material | Plastic | | Size | 35 x 96 x 55mm | | Connection method | Cable | | Operating voltage | 12 - 24V DC (-15% / +10%) | | Usable ambient temp. | 0°C to +50°C | | Weight (approx.) | 180g |
|
|
|
|
|
LM10 TYPICAL APPLICATIONS
|
Workpiece detection
|
Diameter control
|
Thickness measurement
|
|
|
Jonizatory
Produkty
